Modal Shaker 60 lbf

Ground Vibration Testing Exciter | Model 2060E

The Modal Shop’s Modal Shaker Model 2060E, a lightweight electrodynamic modal exciter, is capable of providing up to 60 lbf (267 N) of peak force excitation in a small footprint weighing just 37 pounds (17 kg). With an extended 1.4" (36 mm) stroke enhancing input levels at low frequencies and useful frequency range beyond 6 kHz, the 2060E is suitable for structural testing and experimental modal analysis applications, including single and multiple inputs (SIMO and MIMO) using random, burst random, sine dwell or chirp excitation signals.



  • Through-hole armature with chuck and collet attachment provides simple set-up with modal stingers.
  • Lightweight and portable – weighing just 37 lb (17 kg)
  • Trunnion base provides flexibility and easy set-up when aligning the shaker and choosing best exciter location(s)
  • 1.4" extended stroke for low frequency and broad frequency range supply adequate input energy for most modal applications
  • Forced air cooling sufficient to meet full shaker performance (60 lbf/133 N) specifications

The 2060E modal exciter is supplied in a trunnion base allowing full rotation for easy setup. The through-hole armature design with chuck and collet attachment is ideal for use with either traditional modal stinger rods or piano wire stingers. These stingers greatly simplify test setup with an easy connection to the force sensor and test structure, and help decouple cross-axis force inputs, minimizing input force measurement errors while using the modal shaker. For horizontal force inputs, the 2060E adapts directly to The Modal Shop’s Lateral Excitation Shaker Stand Model 2050A.


View Datasheet  |   View Shaker Family Datasheet

 2060E ShakerK2060E030 KitK2060E060 Kit
Force Rating – lbf (N)60 (267)30 (133)60 (267)
Max Frequency – Hz [1]6 000
Max Stroke – in (mm) pk-pk1.4 (36)
Shaker Model2060E
Amplifier Model-2100E21-4002050E09
Accessories Included

[1] Load dependent


HardwareTrunnion base with EasyTurn™ handles
Shaker cable 10 ft (3 m)
Chuck with collets
10-32 mounting adaptor
Stinger Kits2150G12
PCB 288D01ICP® impedance head driving point sensor
PCB 208PCB 208 series ICP® force sensors
2050ALateral Excitation Stand
2100E13Modal Accessory Kit, for use with 2050A excitation stand