Mini Electrodynamic Shakers

Educational Laboratory Research | Models 2004E and 2007E

The compact design and portability make the 2004E/2007E mini-shakers a versatile, accessible, and popular solution for test and instrumentation engineers. They are ideally suited for general purpose vibration testing of small components, electronic assemblies, Integrated Circuits and Printed Circuit Boards, or as an excitation transducer for experimental modal, academic, biomedical, or laboratory research.



  • Up to 7 pounds (31 N) pk sine force
  • Up to 0.5 inch (1.27 cm) stroke
  • Payloads up to 2 lb (0.91 kg)
  • 10-32 threaded mounting insert
  • Wide frequency band operation up to 11 kHz
  • Trunnion mounting base with EasyTurn™ handles


  • General vibration testing
    • Small components
    • Sub-assemblies
    • Biomedical
  • Experimental modal analysis
  • Educational laboratory research

These electrodynamic exciters are small, portable permanent magnet shakers. They are ideally suited for general purpose vibration testing of small components and sub-assemblies, or as excitation transducers for modal, academic, biomedical, or laboratory research. The shakers feature extremely rugged suspension systems using carbon fiber composite leaf armature flexures. Isolated linear bearings provide low distortion and eliminate the need for reaction wrenches when mounting loads to the armature. A trunnion base with EasyTurn™ handles allows for convenient mounting and positioning. Each transducer is delivered with a variety of 10-32 threaded nylon stingers which provide an attachment mechanism to test articles as electrical isolation.


View Datasheet  |   View Shaker Family Datasheet

 2004E ShakerK2004E004 Kit2007E ShakerK2007E007 Kit
Force Rating – lbf (N)4.5 (20)7 (31)
Max Frequency – Hz [1]11 0009 000
Max Stroke – in (mm) pk-pk0.2 (5)0.5 (13)
Shaker Model2004E2007E
Amplifier Model-2100E21-100-2100E21-100
Accessories Included

[1] Load dependent


HardwareTrunnion base with EasyTurn™ handles and mounting holes
2110G06 Nylon Stinger kit, pack of three
PCB 208C01Multi-purpose, ICP®  force sensor, 10 lb (45 N) comp., 10 lb (45 N) tension, 500 mV/lb (10 mV/N)
PCB 288D01ICP®  impedance head, force/accel: Force: 100 mV/lb (22.4 mV/N); Accel: 100 mV/g (10.2 mV/(m/s2))
2110 SeriesStinger kit, 10-32 threaded nylon, various lengths, pack of three
2120 SeriesStinger kit, 10-32 threaded stainless-steel, various lengths, pack of three

Payload Curves

K2004E004 Payload Curve

K2004E004 Payload Curve

K2007E007 Payload Curve

K2007E007 Payload Curve